What should be paid attention to when installing shelves

u003cpu003e The installation of shelves is to facilitate the use of customers. It is necessary to provide convenience for customers. The shelf factory has summarized many years of experience. In order to guide the installation and acceptance of general equipment, ensure quality and safety, promote technological progress, and improve service efficiency, And formulate installation technical requirements. Shelf installation should be constructed according to the picture. When the website or design is not applicable, it should be approved for construction in time.u003c/pu003eu003c/pu003eu003cpu003e The concealed project should be installed before the concealed project Carry out inspections and continue construction after passing the test. The various measurement and testing instruments, instruments, instruments, and equipment used in the installation should comply with the current national measurement regulations, and the accuracy should not be lower than the installation requirements.u003c/pu003eu003cpu003e Self-inspection should be carried out during the installation process. The installation and construction of the shelf should comply with the current national standards.u003c/pu003eu003cpu003e During assembly and installation, the parts should be calibrated one by one, and the dimensions of the parts should be checked and confirmed The setting of the line. The construction range is determined by the plane, the axis, the edge line, and the elevation line. The installation datum. The datum position is determined according to the datum and the straight line is drawn.u003c/pu003eu003cpu003e When measuring straightness and parallelism, the following requirements should be met: diameter 0.5mm cotton thread should be used. Both ends are supported by pulleys to support the same elevation. The weight selection should be determined according to the weight of the rope and the horizontal tension of the diameter.u003c/pu003eu003cpu003e Anchor bolts Anchor bolts should meet the following requirements : The center line of the expansion bolt should be at the base of the expansion bolt, and the distance between the bottom of the figure and the surface of the base should not be less than 3d and not less than 30mm; the center distance of two adjacent expansion bolts should not be less than 7.5.u003c/pu003e u003cpu003e Prevent equipment expansion bolts from drilling into the embedded steel bars, buried pipes, cables, etc. in the foundation. Reserved holes shall not be used. The foundation concrete strength of the expansion bolts in the device shall not be less than 10MPa.u003c/pu003eu003cpu003e Expansion Bolts should not be used for floor cracks. The diameter and depth of the expansion bolt holes should meet the requirements of the table Ⅰ The drilling depth can exceed the large intestine by 5-10 mm; the diameter and depth of the holes should be checked in time. The expansion bolts should be partially vertical.u003c/p u003e
Competitiveness policy of Hshelf Retail Solutions Co., Ltd. is about existing clusters as a platform for upgrading microeconomic fundamentals, where structural policies aim to change the industrial composition of an economy more directly.
Hshelf Retail Solutions Co., Ltd. didn’t receive any negative feedback from our customers before, which proves that customers have faith in us.
By balancing the efficiencies of new technologies with the personal touch of highly trained and motivated professionals, Hshelf Retail Solutions Co., Ltd. is able to deliver solutions and services that exceed our customers’ expectations. We thereby earn their loyalty.
Offering a loyalty program not only makes customers feel valued, but it allows Hshelf Retail Solutions Co., Ltd. to easily collect important information about customers.