Popularize concrete measures to prevent warehouses from being flooded

u003cpu003e In order to prevent flood peak gates, cable trenches, warehouses, warehouse walls, doors and windows, and cable holes from entering the factory, the following requirements are put forward: coordination of various departments and flood forecasting should be strengthened. When heavy rain is forecasted, operators on duty enter the warehouse The door is closed; when the precipitation in the warehouse area reaches 30 mm per hour, the operator should visit the points mentioned above in time. u003c/pu003eu003cpu003eu003c/pu003eu003c/pu003eu003cpu003eu003c/pu003eu003cpu003e Strengthen daily inspection work, require inspectors to check the flood control ditch in the warehouse area for a week, and check in time after the rainstorm, and deal with it in time. The problem. ) Prepare enough grass bags, sand, rags, rapid solidification to stop the flow of key water; strengthen the inspection and maintenance of the flood control system, the arc gate hoist system, and the diesel generator system to ensure that the flood control facilities are complete during the flood season. u003c/pu003eu003cpu003e Strengthen equipment maintenance to ensure the normal and reliable operation of the pumps and the normal operation of the signal alarm and start device; rescue measures for driving the warehouse: When the flood enters the warehouse door, immediately place it in the warehouse with quick-setting cement for storage ; When the flood enters other traffic gates, it is immediately sealed off grass bags, soil bags and quick-setting cement, and drains are cleared. u003c/pu003eu003cpu003e In the case of a submerged drainage channel, the following principles should be followed: The operation staff should first check whether the pump is normal; if the pump does not operate normally, the maintenance personnel should inform the drainage pump of the water flow immediately during maintenance Normally, the reservoir with the water pump will pump out. When the drainage pump is operating normally, the water intake corridor is large, and the maintenance personnel should immediately notify the maintenance personnel to find out the cause. Seal drainage treatment. u003c/pu003eu003cpu003e If the bubbling head, tail pipe, wheel chamber or valve bursts causing water to accumulate in the warehouse, the operator should promptly report the adjustment and responsibilities of the staff on duty, stop immediately, and start various pumps that collect Wells To prevent the expansion of water storage accidents. u003c/pu003eu003cpu003e If the foam head is leaking from the generator pit flat water seal; the staff on duty should immediately report to the duty leader, start each set of drainage pumps, notify the maintenance staff to arrive at the same time, drop the water gate, tail gate, drain Pipe water accumulation, and follow the corresponding treatment to maintain the water level in the workplace after the tailpipe. u003c/pu003e